Enterasys Quick Commands

show port vlan ge.1.1
ge.1.1 is set to 247

show mac port-string tg.1.4       

MAC Address       FID  Port          Type    Status

----------------- ---- ------------- ------- -------

00-00-00-00-00-00 0    tg.1.4        self 

show port egress ge.1.24

  Port       Vlan      Egress          Registration

  Number      Id        Status            Status

  ------------------------------------------------------------

ge.1.24     4         tagged          static

ge.1.24     6         tagged          static

ge.1.24     9         tagged          static

ge.1.24     104       tagged          static

ge.1.24     114       tagged          static

ge.1.24     120       tagged          static

ge.1.24     125       tagged          static

show port status

          Alias        Oper    Admin   Speed

Port      (truncated)  Status  Status  (bps)     Duplex  Type

--------- ------------ ------- ------- --------- ------- ------------

ge.1.1                 Down    Up      N/A       N/A     BaseT RJ45/PoE

ge.1.2                 Down    Up      N/A       N/A     BaseT RJ45/PoE

ge.1.3                 Up      Up      1.0G      full    BaseT RJ45/PoE

show port inlinepower ge.1.1

Port     Type                 Admin   Oper                Priority   Class   Power(W)  Capability  Power Select

-------  -----                ------  -----------------   --------   -----   --------  ----------  -------------

ge.1.1                        auto    Searching           Low        0                 802.3at

Disable/Enable inline power

set port inlinepower ge.1.1 admin off

set port inlinepower ge.1.1 admin auto

Extreme Networks - Enable/Disable Inlinepower on a port

If you are looking to disable the power for devices such as AP's, Voip, phones, and Security cameras here are some commands that you will need to know so you will be able to see if the devices is delivering power or need to shut it on or off.

This is for the EXTREME switches.  (EXOS)


show inline-power stats ports 1:19

Slot-1 EXOS_Switch.4 # show inline-power stats ports 1:19

                                STATISTICS COUNTERS
Port  State         Class     Absent  InvSig   Denied    OverCurrent   Short

1:19  delivering    class1        1     144       0          0             0

disable inline-power ports 1:1

enable inline-power ports 1:1

Enterasys - Enable/Disable inline-power for POE

If you are looking to disable the power for devices such as AP's, Voip, phones, and Security cameras here are some commands that you will need to know so you will be able to see if the devices is delivering power or need to shut it on or off.

This is for the ENTERASYS switches. (EOS)

show port inlinepower ge.X.X

Test(su)->show port inlinepower ge.1.3

Port     Type                 Admin   Oper                Priority   Class   Power(W)  Capability  Power Select

-------  -----                ------  -----------------   --------   -----   --------  ----------  -------------

ge.1.3                        auto    Delivering Power    Low        1       2.80      802.3at

Turn port power on/off

set port inlinepower ge.X.X admin off

set port inlinepower ge.X.X admin auto

Enterasys - Disable Radius with MIBs

If you are looking to disable Radius because you can not log in with your radius account and want to use the local username/password of the switch here is the MIB OID that will allow you to disable Radius.

Name:  etsysRadiusAuthClientEnable

OID: 1.3.6.1.4.1.5624.1.2.4.1.3