Extreme Networks - Configure LACP (Port-Channels)

Configure LACP in ExtremeOS

EXOS version 21.1.2.14

Extreme handles LACP a lot differently than most vendors.  Instead of creating a Port-Channel or a LAG port (Enterasys) EXOS uses "sharing".

Youtube Link --->  https://youtu.be/0sK9chrJAm8

Create LACP group (sharing group)

enable sharing 1 grouping 1-2 algorithm address-based L2 lacp

• The first port will be the MASTER port of the LACP group.  In this case it will be PORT 1.
• You will only add your VLAN's to the MASTER port.  If you try to add them to the slaves you will get an error.

Configure CDP (Cisco Discovery Protocol) - Extreme Networks

Configure CDP in ExtremeOS

EXOS version 21.1.2.14

Step 1:
Create and egress vlan out of your uplink port.  Look here for a review.

Step 2:
Configure the VLAN you will be using as your voice vlan to be TAGGED.

configure vlan VLAN_10 add ports 1 tagged

Step 3:

Configure CDP

enable cdp ports 1

configure cdp voip-vlan VLAN_10 port 1

Step 4:

CDP Detect power (optional)

configure cdp power-available advertise port 1

Quick Setup:

configure vlan VLAN_4010 add ports 1 tagged

enable cdp ports 1

configure cdp voip-vlan VLAN_4010 port 1

configure cdp power-available advertise port 1


UNCONFIG CDP:

disalbe cdp ports 1
configure cdp voip-vlan none ports 1
configure cdp power-available no-advertise ports 1