Handy Commands for EXOS switches

These are some handy commands if you looking for certain information in EXOS.  I will continue to update this list as i find more useful commands.


show port "port" information details
- General information about a port.

show port vlan | begin "port"
- Vlans that are egressed out of a port

show vlan
- Shows all VLAN's, VID, routed interfaces and protocols used on VLAN's

show iproute
- shows all routes

show sharing
- Shows LACP links

show port statistics
or
show port statistics no refresh | "port"
- The first command will give a running statistics for all ports.  You can use "U" and "D" to scroll through the ports
- The second command will give you the snapshot of statistics for a single port.... you can not do a running statistic report for a single port currently on v21 or below.


disable inline-power ports 1:1
- disables poe going to a port.

configure vlan <vlan> add ports 1:1 untagged/tagged
- assigns a vlan to a port..... if a port is already untagged you must take the vlan off before you can add a new untagged vlan

Extreme Networks - Configure LACP (Port-Channels)

Configure LACP in ExtremeOS

EXOS version 21.1.2.14

Extreme handles LACP a lot differently than most vendors.  Instead of creating a Port-Channel or a LAG port (Enterasys) EXOS uses "sharing".

Youtube Link --->  https://youtu.be/0sK9chrJAm8

Create LACP group (sharing group)

enable sharing 1 grouping 1-2 algorithm address-based L2 lacp

• The first port will be the MASTER port of the LACP group.  In this case it will be PORT 1.
• You will only add your VLAN's to the MASTER port.  If you try to add them to the slaves you will get an error.